Comment on High Voltage Capacitor Discharge Videos by JonC.

Hi Paul, I haven’t done a flashlamp pumped dye laser as one of my projects. I do have some stuff attributed to me in the Laser FAQ but I think you’re looking for Jon Singer, his site is at http://www.jonsinger.org/areas/area.lasers.html though I couldn’t get it to load so I don’t know if it’s temporarily offline, or permanently offline. I think he also has a site as http://www.jossresearch.org but I couldn’t get that to load up either. Best of luck with your project!

More Comments by JonC

Cyonics / Uniphase SLT-30 Air-Cooled Argon Hi Arty,
Check on eBay, they seem to come from some sort of large commercial laser printing equipment and show up from time to time. There are a surprising number of them out there, do an ebay search for them, …

Co2 Laser Diagrams The gas from the laser is vented. To re-use it you would need a gas processing plant or something along those lines, certainly not in the range of the home hobbyist :)

Continue Reading Co2 Laser Diagrams

Co2 Laser Diagrams Not very long but it depends on the complexity of your system and how much experience you have with these kind of projects.

If you’re new to it you’re likely to have issues with the ‘little details’ on the …

Continue Reading Co2 Laser Diagrams

85W Co2 Laser Project Hi I don’t have any information on gas mixes for sealed type Co2 lasers. Commercial producers of sealed Co2 lasers use a catalyst inside the laser tube along with proprietary gas mixes to ensure long lived tubes. Without the catalyst …

Continue Reading 85W Co2 Laser Project

65W Merrimack Co2 Laser Hi Ruth,
There is no hole in the output coupler, it is totally solid. The picture you see with the hole in the center is without the output coupler installed. …

Continue Reading 65W Merrimack Co2 Laser

Similar Posts:

Share

Tags: , , ,